Tel: +8653185996661
Mob: +8613789821291(Wechat)
Add: LuoER High-tech Development Zone, Dangjia Town, Shizhong District,
Jinan City, Shandong Province
Control system: The control system takes motion controller as the core, based on advanced motion control algorithm, to achieve high speed and high precision position control. The 24-bit high-precision special weighing module is used to realize high-precision force value collection.10 inch high resolution touch screen, friendly interface, easy to operate.
Function Introduction
1 The machine is composed of main engine, control system, software system, safety assurance device and auxiliary device
2 The stiffness and strength of the frame are fully guaranteed by the mechanical finite element analysis. Strong anti-overload ability; Important parts and components are processed in one time by machining center, which ensures the permanent precision of the equipment.The transmission system is composed of synchronous tooth belt, grinding precision ball screw pair and guiding part, etc. The drive system is driven by panasonic ac servo governor and its motor, with wide speed range and high reliability.The load sensor with special structure is adopted to prevent the influence of the spring's partial load on the test results
3 Control system: The control system takes motion controller as the core, based on advanced motion control algorithm, to achieve high speed and high precision position control. The 24-bit high-precision special weighing module is used to realize high-precision force value collection.10 inch high resolution touch screen, friendly interface, easy to operate.
4 Safety protection measures：10% overload protection, limit position protection of beam, over current, over voltage, over speed protection
5 Variety of test methods ：deformation at determined load；load at determined deformation；length at determined load；load at determined length。
Main specifications and technical parameters
| NO. | Project name | Parameters and indexes | ||
| 1 | Max load capacity (N) | 1 2 5 | 10 20 50 | 100 200 |
| 2 | measurement range of load | 1%-100% of full scale | ||
| 3 | Minimum resolution of load | 0.00001 | 0.0001 | 0.001 |
| 4 | Minimum resolution of displacement(mm) | 0.001 | ||
| 5 | Compression test space (mm) | ≥180 (customizable) | ||
| 6 | Tensile test space(mm) | ≥180 (customizable) | ||
| 7 | Diameter of plate(mm) | Φ50mm | ||
| 8 | parallelism error of platens | ≤0.1mm | ||
| 9 | Offset error of platens | ≤1.0mm | ||
| 10 | relative error of load indicator | ≤±1.0% | ||
| 11 | relative error of load indicator repeatability | ≤1.0% | ||
| 12 | relative error of zero | ≤±0.1%F●N | ||
| 13 | Deformation indication error | ≤±(50+0.15l)μm | ||
| 14 | Quality standard | GB/T2611-92《试验机通用技术要求》 | ||
